Here are ten useful tips and tricks to repair drywall:

1. Use mesh tape: Mesh tape is a great choice for small holes and cracks because it is self-adhesive and easier to work with than paper tape.
   
2. Cut out the damaged area: For larger holes, cut out the damaged area in a square or rectangular shape. Use a drywall saw or utility knife to make the cuts.
   
3. Use a patch: Cut a piece of drywall slightly larger than the hole or damaged area. Secure the patch in place with screws or drywall adhesive.
   
4. Apply joint compound: Use a putty knife to apply joint compound over the mesh tape or patch. Smooth it out and let it dry completely.
   
5. Sand the area: Once the joint compound is dry, sand the area with a fine-grit sandpaper to create a smooth surface.
   
6. Repeat layers: If necessary, repeat the process of applying joint compound and sanding until the surface is smooth and even.
   
7. Prime the area: Prime the repaired area with a primer to ensure the paint will adhere properly.
   
8. Match the texture: If the repaired area has a different texture than the surrounding wall, you can use a texture spray or apply joint compound with a textured roller to match it.
   
9. Use a drywall patch kit: For small to medium-sized holes, you can use a drywall patch kit that includes all the necessary materials and instructions.
   
10. Hire a professional: For larger or more complex repairs, it may be best to hire a professional to ensure the job is done correctly.
    

By following these tips and tricks, you can successfully repair drywall and restore the appearance of your walls.  If you have any questions about how to repair drywall call the best around, Alberta drywall.

Here are 5 ways to avoid drywall texturing mistakes:

1. Proper Preparation: Before applying texture, ensure that the surface of the drywall is properly prepared. This includes cleaning the surface of any debris, smoothing out any bumps or ridges, and repairing any cracks or holes.
   
2. Choose the Right Texture: There are different types of textures available, and each one requires different tools and techniques to apply. Consider the type of texture that is best suited for your project and ensure that you have the proper tools and techniques to achieve the desired result.
   
3. Practice on Sample Boards: Before applying texture to the entire wall, practice on a small sample board. This will give you the opportunity to experiment with different techniques and textures to achieve the desired result.
   
4. Use Proper Techniques: When applying texture, it's important to use proper techniques to achieve a consistent and uniform finish. This includes using a consistent spraying technique, maintaining a consistent distance from the wall, and applying texture evenly.
   
5. Allow Proper Drying Time: After applying texture, it's important to allow proper drying time before painting or applying any additional coatings. This will ensure that the texture has fully set and will not be affected by subsequent coatings.
   

By following these tips, you can avoid common drywall texturing mistakes and achieve a professional-looking finish.  Call Oiltown drywall for the best in Edmonton Drywall companies.

T-bar ceilings, also known as drop ceilings or suspended ceilings, can help with sound reduction to some extent. The sound-absorbing properties of a T-bar ceiling depend on various factors such as the type of tiles used, the size of the ceiling, and the installation method. Here are some ways that T-bar ceilings can help reduce sound:

1. Sound absorption: T-bar ceilings can be fitted with tiles that have sound-absorbing properties. These tiles are designed to absorb sound waves and reduce the amount of noise that bounces off the ceiling. The greater the sound absorption of the tiles, the better the sound reduction will be.
   
2. Sound-blocking: T-bar ceilings can also help block sound transmission between floors. If the ceiling cavity is filled with insulation material, this can help block sound transmission between floors, reducing the amount of noise that travels through the ceiling.
   
3. Dampening: T-bar ceilings can help dampen sound by reducing the amount of reverberation in a room. This is particularly useful in large open spaces such as offices or classrooms where sound can bounce off walls and ceilings, causing echoes and making it difficult to hear.
   

Overall, while T-bar ceilings can help with sound reduction, they may not be as effective as other soundproofing measures such as acoustic panels or insulation. The sound reduction provided by T-bar ceilings can vary depending on the specific configuration and installation of the ceiling, as well as the types of sound waves that are being produced. Consulting with a professional acoustic engineer can help determine the best soundproofing solution for your specific needs.

Mudding and taping drywall is a skilled task that requires a certain level of experience and expertise. While it is possible to do the mudding and taping yourself if you have the necessary skills, tools, and patience, it is often recommended to hire a professional to ensure the job is done correctly and efficiently.
Here are some reasons why you might want to consider hiring a professional for mudding and taping your drywall:

1. Quality work: A professional contractor will have the expertise and experience to ensure the finished product is smooth, level, and free from cracks, bubbles, or other imperfections.
   
2. Time-saving: Mudding and taping can be a time-consuming process, especially if you are not experienced in the task. Hiring a professional can save you time and energy, allowing you to focus on other aspects of your project.
   
3. Tools and materials: Professional contractors will have access to the right tools and materials needed to complete the job to a high standard. They will also be familiar with the latest products and techniques, ensuring a quality finish.
   
4. Cost-effective: While it may seem like an added expense to hire a professional for mudding and taping, it can actually be more cost-effective in the long run. A professional job will last longer and require less maintenance, which can save you money in the long term.
   

In summary, while it is possible to do the mudding and taping yourself, hiring a professional drywaller can provide a higher level of quality and efficiency, saving you time, energy, and potentially money in the long run.

Planning a commercial drywall project in Edmonton AB involves several steps, including:

1. Determine the scope of the project: Before you start planning the project, determine the scope of the work you need to do. This includes the size of the area you need to drywall, the type of drywall needed, and the timeline for completing the project.
   
2. Get estimates: Obtain estimates from multiple contractors to determine the cost of the project. Choose a contractor who has experience in commercial drywall projects and has a good reputation.
   
3. Obtain permits: Check with the city to determine what permits are required for the project. You may need building permits and electrical permits, depending on the scope of the work.
   
4. Develop a timeline: Create a timeline for the project, including start and end dates, as well as any milestones or deadlines that need to be met.
   
5. Order materials: Once you have determined the type and quantity of drywall needed, order the materials and have them delivered to the job site.
   
6. Prep the site: Before the drywall installation can begin, the job site must be prepped. This includes removing any existing drywall, framing, or insulation, as well as cleaning the area to ensure a smooth surface.
   
7. Install the drywall: The drywall installation process involves measuring and cutting the drywall to fit the space, hanging it on the walls and ceiling, and securing it in place with screws or adhesive.
   
8. Finish the drywall: Once the drywall is installed, it needs to be finished. This involves applying joint compound to the seams and screw holes, sanding the surface to create a smooth finish, and priming and painting the surface.
   

By following these steps, you can plan and execute a successful commercial drywall project in Edmonton AB.

Drywall installation is a common home renovation project that involves installing drywall sheets to create walls or ceilings. Here are some steps involved in drywall installation:

1. Measure and cut the drywall: Measure the height and width of the walls or ceiling, and use a drywall knife or saw to cut the drywall sheets to the appropriate size.
   
2. Install corner bead: Install corner bead around any outside corners of the wall using nails or screws.
   
3. Apply adhesive: Apply a layer of construction adhesive to the studs or ceiling joists where the drywall will be installed.
   
4. Hang the drywall: Place the drywall sheets on the adhesive and secure them to the studs or ceiling joists using drywall screws or nails. Make sure the seams between the sheets are staggered.
   
5. Tape and mud the seams: Apply drywall tape over the seams between the drywall sheets, then apply joint compound (also known as mud) over the tape with a drywall knife. Smooth out the mud and let it dry.
   
6. Sand and prime the drywall: Sand the mud until it is smooth, then apply a primer coat of paint or primer to the drywall.
   
7. Finish with paint or texture: Apply a final coat of paint or texture to the drywall to finish the job.
   

Keep in mind that drywall installation can be a difficult and time-consuming task, and may require the help of a professional contractor if you are not experienced with home renovation projects. A professional can ensure that the job is done safely, efficiently, and to your satisfaction.

​The cost of drywall installation in Edmonton, AB for a residential property can vary depending on a few factors. Here are some general estimates to consider:

1. Size of the project: The larger the project, the higher the overall cost. Generally, contractors charge per square foot of drywall installation, with the average price ranging from $1.50 to $3.50 per square foot.
2. Type of drywall: There are different types of drywall, each with their own cost. Standard drywall sheets typically cost around $10 to $20 per sheet, while moisture-resistant and fire-resistant drywall can cost up to $30 or more per sheet.
3. Labor costs: Drywall installation requires skill and experience, and contractors typically charge by the hour or by the project. The cost of labor can vary depending on the contractor's experience, location, and availability.

Based on these factors, the cost of drywall installation for a residential property in Edmonton, AB can range from $1,500 to $5,000 or more for a typical 1,000 square foot space. It's important to get multiple quotes from different contractors and compare the details of each estimate to determine which one offers the best value for your budget.