Repairing damaged corners in drywall can be done in several steps:

1. Cut away any loose or damaged paper on the drywall corner with a utility knife or scissors. Make sure to remove all loose debris and smooth out the edges.
   
2. Apply a layer of joint compound to the damaged area using a putty knife. Smooth the compound out to cover the damaged area and feather the edges to blend with the surrounding wall.
   
3. Apply a strip of paper drywall tape over the joint compound, making sure to center it over the damaged area. Use the putty knife to press the tape firmly into the compound, smoothing out any wrinkles or bubbles.
   
4. Apply a second layer of joint compound over the drywall tape, covering it completely and feathering the edges again.
   
5. Let the compound dry completely, following the manufacturer's instructions.
   
6. Sand the repaired area lightly with fine-grit sandpaper, making sure to feather the edges of the repair so that it blends seamlessly with the surrounding wall.
   
7. Prime the repaired area with a drywall primer, and then paint over it to match the surrounding wall.
   

By following these steps, you should be able to repair damaged corners in your drywall and restore your wall to its original condition.  Call Alberta Drywall if you have any questions

No, asbestos is no longer used in the manufacturing of drywall. However, older homes or buildings may still have asbestos-containing materials, including drywall, that were installed before the 1980s. Asbestos was commonly used as a fire retardant and insulation material in various building products until it was banned in the United States in the late 1970s due to health concerns.
If you suspect that your home or building may have asbestos-containing drywall or other materials, it is important to have a professional asbestos inspection conducted. Disturbing asbestos-containing materials can release dangerous fibers into the air, which can be inhaled and cause serious health problems such as lung cancer and mesothelioma.
If the inspection reveals the presence of asbestos-containing materials, it is best to hire a licensed asbestos abatement professional to safely remove and dispose of the materials. Attempting to remove asbestos-containing materials yourself can be extremely hazardous and is not recommended.

There are several benefits to using drywall in Edmonton AB, including:

1. Cost-effectiveness: Drywall is one of the most cost-effective options for covering interior walls and ceilings. It is relatively inexpensive compared to other materials like wood or plaster.
   
2. Easy to install: Drywall is easy to install and can be done quickly by professionals. This makes it a popular choice for both commercial and residential construction.
   
3. Versatility: Drywall can be painted, textured, or wallpapered to match any décor or design preference. It is also available in different sizes, thicknesses, and types to meet the specific needs of any project.
   
4. Fire-resistant: Drywall is made of gypsum, which is naturally fire-resistant. This makes it a safe option for interior walls and ceilings.
   
5. Sound insulation: Drywall has excellent sound insulation properties, making it a great choice for homes, offices, and other buildings where noise reduction is important.
   
6. Durability: Drywall is strong and durable, making it resistant to damage from everyday wear and tear. It can also withstand minor impacts and can be easily repaired if needed.
   

Overall, drywall is a popular and practical option for covering interior walls and ceilings in Edmonton AB, offering a range of benefits that make it a great choice for any construction project.

Spray foam insulation and pink fiberglass insulation each have their own advantages and disadvantages, so which one is "better" depends on your specific needs and preferences. However, here are some reasons why spray foam insulation may be a better choice for certain situations:

1. Energy efficiency: Spray foam insulation has a higher R-value (a measure of insulation's ability to resist heat flow) per inch than pink fiberglass insulation. This means that spray foam can provide better thermal insulation and potentially lower energy bills.
   
2. Air sealing: Spray foam insulation is applied as a liquid that expands and hardens into a solid, filling gaps and crevices in walls and attics to create an air-tight seal. This can prevent air leakage and infiltration, which can also help improve energy efficiency.
   
3. Moisture resistance: Because spray foam insulation is made of a closed-cell structure, it can act as a moisture barrier, preventing water and moisture from penetrating the building envelope. This can help prevent mold growth and water damage.
   
4. Longevity: Spray foam insulation can last longer than pink fiberglass insulation, which can settle over time and lose some of its insulating properties.
   

However, it's worth noting that spray foam insulation can be more expensive than pink fiberglass insulation and requires specialized equipment and professional installation. Additionally, spray foam insulation may not be the best choice for every situation, such as in areas with high moisture levels or in homes with existing insulation that can't be easily removed. Ultimately, it's important to consult with a professional to determine which type of insulation is best for your specific needs and budget.